220v Infrared Human Body Sensor Detection Switch PIR

220V AC 50Hz Auto Infrared Human Sensor Switch PIR Microwave Radar Body Motion Sensor Module Adjustable For Time Distance Range.

230V intelligent human body sensor module/ Microwave radar sensor switch / delay distance adjustable with light control sensor Specs: According to the Doppler effect, the induction of the surrounding environment of moving objects. When the person or moving objects into the sensing range, the switch work to the load power, if the sensor has been kept active range, the switch will automatically continue to delay, will not go out. To maintain a static state or leave the sensing range, the switch automatically delay after a period of power. With light control function, the default night or low light before the normal induction. Can penetrate the bottom of the non-metallic material sensors, such as glass, gypsum board, wood, plastic, etc., less than 15cm of the wall can penetrate the induction.

Especially suitable for hidden installation, does not affect the appearance.

SPECS OF Human Body Detection Sensor:

1. Voltage: AC 220V /50Hz
2. Load power: standby ~0.5W
3. Induction distance: 4-8M (Adjustable)
4. Time extension: 10s-70s (Adjustable)
5. Light up: Light control, can not be adjusted
6. Sensing Angle: 180×360°
7. Environment temperature: -10° ~ 60°
8. Color: White
9. Size: 4.8 x 3.5 x 2.2cm/1.9″ x 1.4″ x 0.87″(L*W*T) Wire Length: 14cm/5.7″
10. Fixing Hole Size: 8 x 3mm/0.31″ x 0.12″(L*W) Fixing Hole Center Distance: 28mm/1.1″

Scope:

corridors, aisles, stairs Load type: incandescent, energy saving lamps, lamp, LED Load type: incandescent lamp ≤ 100W, energy saving lamps, circular tube ≤ 32W, LED ≤ 15W 1 prohibits live installation is prohibited shorted load. (Do not live adjustment switch will cause damage to your peril) 2 prohibits the use of ultra-load power. 3 when the wall thickness is less than 15cm, the wall switch may react. 4 in the induction area, do not affect the detection of objects or obstacles stop the movement, do not have electromagnetic interference from other devices. 5 do not object to the volatile as the installation base. 6 initially powered on, the sensor will automatically switch point lights. Ensure free movement within the sensing range of objects, one cycle after the switch is open, light control automatic recovery, if there is activity around the object, the switch will always remain on. 7 between the two switches if no obstacles or obstructions are easily penetrate the material (such as glass, wood, etc.), keep the distance between the switch more than 5 meters, too close between the two switches interfere with each other.

220v Infrared Human Body Detection Sensor Switch PIR Their main differences include: The IR sensors detect whether the light from the transmitter is emitted by an object or a person. Whereas, the PIR sensors detect changes in the levels of energy around the area.

PIR sensors don’t actually emit the infrared; objects give the sensor infrared rays.