W1209 W2809 DC12V Digital LED Thermostat Temperature Controller Module with Waterproof NTC Sensor 

The W1209WK Temperature Controller also named as a W2809 temperature controller. And It is a very useful product for egg incubators. It also contains a waterproof temperature sensor probe. We can also use it as thermostats and other temperature control applications.W2809WK is very reasonable. And this product is available at multanelectronics at a very reasonable price.So The Mini W2809 W1209WK Microcomputer Thermostat Regulator DC 12V 20A Temperature Controller

Specifications of W1209Wk W2809 Controller:

The W1209WK Temperature Controller also named as a W2809 temperature controller. And It is a very useful product for egg incubators. It also contains a waterproof temperature sensor probe. We can also use it as thermostats and other temperature control applications.W2809WK is very reasonable. And this product is available at multanelectronics at a very reasonable price.So The Mini W2809 W1209WK Microcomputer Thermostat Regulator DC 12V 20A Temperature Controller

• The input voltage:DC12V
  Power consumption: Static current less than or equal to 35 mA;attract current less than or equal to 65 mA.
  Power supply:  12v  200 mA
  Temperature measurement range: -50℃-110℃
  Accuracy: 0.1℃
  Return difference accuracy:0.1℃
  Refresh rate:0.5s
  High temperature protection: 0-110℃
  Measurement input:NTC (10K 0.5%) waterproof type sensor
  Output:1 way 10 A relay
  Environmental requirements: -10℃ to 60℃; Humidity : 20%-85%
  Size: 48mm x 29mm x 32mm
  Hole size: 46 x 26.5mm

Connection Between Load and Temperature Controller:

• Hold that W2809 temperature controller as its back will be in front of your face.
• Its most left connector will be connected to the 12V DC.
• The next connection will be attached to the ground.
• Its third left connection will be connected to the Load Line of 220V AC.
• The positive connection of the bulb will be connected to the rightmost connector of the temp controller.
• And bulb’s negative connector will be attached to the neutral point of the 220V AC.

Related Links: