NodeMCU ESP32S board Development Board ESP-32S WIFI+Bluetooth Main Board
The core of this module is the ESP32 chip, which is scalable and self-adaptive.
The clock frequency can be adjusted from 80MHz to 240MHz, and it supports RTOS. It is a general-purpose Wi-Fi+BT+BLE MCU module
The Nodemcu-32s module integrates traditional Bluetooth, Bluetooth Low Energy and Wi-Fi.
It has a wide range of uses: Wi-Fi supports a wide range of communication connections and also supports direct connection to the Internet through routers; while Bluetooth allows users to connect to mobile phones or broadcast BLE Beacon for signal detection.
The data transmission rate supported by the module is as high as 150Mbps, and the antenna output power reaches 20dBm, which can realize wide-range wireless communication.Features:
802.11b/g/n (802.11n, speed up to 150Mbps)
WIFI frequency range 2400~2483.5MHz
Clock frequency adjustment range 80MHz to 240MHz
Support RTOS Built-in 2-channel 12 bit high-precision ADC, up to 18 channels
Support UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S interface
Support multiple sleep modes, the sleep current of ESP32 chip is less than 5μA
Embedded Lwip protocol stack
Support STA/AP/STA+AP working mode Support serial port local upgrade and remote firmware upgrade (FOTA)
General AT commands can be used quickly
Support secondary development, integrated Windows, Linux development environment
Type: Development Board
Material: PCB
colour: blackPackage Contents:
1 x NodeMCU ESP32S board
The clock frequency can be adjusted from 80MHz to 240MHz, and it supports RTOS. It is a general-purpose Wi-Fi+BT+BLE MCU module
The Nodemcu-32s module integrates traditional Bluetooth, Bluetooth Low Energy and Wi-Fi.
It has a wide range of uses: Wi-Fi supports a wide range of communication connections and also supports direct connection to the Internet through routers; while Bluetooth allows users to connect to mobile phones or broadcast BLE Beacon for signal detection.
The data transmission rate supported by the module is as high as 150Mbps, and the antenna output power reaches 20dBm, which can realize wide-range wireless communication.Features:
802.11b/g/n (802.11n, speed up to 150Mbps)
WIFI frequency range 2400~2483.5MHz
Clock frequency adjustment range 80MHz to 240MHz
Support RTOS Built-in 2-channel 12 bit high-precision ADC, up to 18 channels
Support UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S interface
Support multiple sleep modes, the sleep current of ESP32 chip is less than 5μA
Embedded Lwip protocol stack
Support STA/AP/STA+AP working mode Support serial port local upgrade and remote firmware upgrade (FOTA)
General AT commands can be used quickly
Support secondary development, integrated Windows, Linux development environment
Type: Development Board
Material: PCB
colour: blackPackage Contents:
1 x NodeMCU ESP32S board
![]() |
Reviews
There are no reviews yet.